Skip to main content

Changes to Step #11

Edit by Gigabit87898

Edit declined by Evan Noronha

Before
After
Unchanged

Step Lines

[* icon_note] If you can see the top layer of your Force Touch sensor among the display adhesive, it means the two layers of the sensor separated and you're going to need to replace or repair it.
[* black] The top layer of the sensor may be adhered to the back of the screen—push it down to separate it, and '''switch to our [guide|41084|Force Touch Sensor guide] from this point on.'''buy a replacement part if needed.
[* black] The top layer of the sensor may be adhered to the back of the screen—push it down to separate it, and '''switch to our [guide|41084|Force Touch Sensor guide] from this point on.'''buy a replacement part if needed.