Skip to main content

Changes to Step #14

Edit by Sam Goldheart

Edit approved by Sam Goldheart

Before
After
Unchanged

Step Lines

[* black] Wedge a plastic opening tool between the right side of the battery and the case.
[* black] Pry the battery up to separate it from the adhesive securing it to the back of the casesystem board.
[* icon_note] Be careful not toicon_caution] '''Do not''' attempt to remove the battery as it is still connected.
[* black] Pry the battery up to separate it from the adhesive securing it to the back of the casesystem board.
[* icon_note] Be careful not toicon_caution] '''Do not''' attempt to remove the battery as it is still connected.