Skip to main content

Changes to Step #10

Edit by Sam Goldheart

Edit approved by Sam Goldheart

Before
After
Unchanged

Step Lines

[* icon_caution] There are two cables connecting the screen to the inside of the watch, near the top left corner. Be careful when prying or you may damage these cables.
[* black] Pry slightly up on the right side of the screen, to free it from any remaining adhesive.
[* black] Pry up on the left to free it as well—but do'''do not attempt to remove the screenscreen''' as it is still held in place by two cables.
[* black] Pry up on the left to free it as well—but do'''do not attempt to remove the screenscreen''' as it is still held in place by two cables.