Skip to main content

Changes to Step #10

Edit by Andrew Optimus Goldheart

Edit approved by Andrew Optimus Goldheart

Before
After
Unchanged

Step Lines

[* icon_caution] There are two cables connecting the screen to the inside of the watch, near the top left corner of the displaycorner. Be careful when prying or you may damage these cables.
[* icon_caution] There are two cables connecting the screen to the inside of the watch, near the top left corner of the displaycorner. Be careful when prying or you may damage these cables.
[* black] Pry slightly up on the right side of the screen, to free it from any remaining adhesive.
[* black] Pry up on the left to free it as well—but do not attempt to remove the displayscreen as it is still held in place by two cables.
[* black] Pry up on the left to free it as well—but do not attempt to remove the displayscreen as it is still held in place by two cables.