Skip to main content

Changes to Step #6

Edit by Sam Goldheart

Edit approved by Sam Goldheart

Before
After
Unchanged

Step Lines

[* black] Roll the opening pick up along the side of the button side of the watch, gently pushing in to separate the adhesive and widening the gap as you go.
[* icon_note] Remember not to push the pick in too far—rolling makes itfar—it's easier to doavoid this by rolling the pick, rather than dragging thea tip to cut the adhesivealong.
[* black] Roll the opening pick up along the side of the button side of the watch, gently pushing in to separate the adhesive and widening the gap as you go.
[* icon_note] Remember not to push the pick in too far—rolling makes itfar—it's easier to doavoid this by rolling the pick, rather than dragging thea tip to cut the adhesivealong.