Skip to main content

Changes to Step #5

Edit by Sam Goldheart

Edit approved by Sam Goldheart

Before
After
Unchanged

Step Lines

[* black] Once you've opened the gap enough, insert the tip of a plastican opening tool and slide itpick under the glass.
[* black] Slide the pick
along the bottom,bottom edge to separate adhesive holding the screen to the case.
[* icon_caution] Be careful not to insert the opening pick too far—onlyfar. Only about 1/8" (~3 about 3 mm) is necessarynecessary, any deeper and you may damage cables.
[* black] Once you've opened the gap enough, insert the tip of a plastican opening tool and slide itpick under the glass.
[* black] Slide the pick
along the bottom,bottom edge to separate adhesive holding the screen to the case.
[* icon_caution] Be careful not to insert the opening pick too far—onlyfar. Only about 1/8" (~3 about 3 mm) is necessarynecessary, any deeper and you may damage cables.