Skip to main content

Changes to Step #2

Edit by Sam Goldheart

Edit approved by Sam Goldheart

Before
After
Unchanged

Step Lines

[* black] Place the heated iOpener on the face of the watch.
[* black] Leave the iOpener on the watch for at least a minute,minute to heat up the screen and soften the adhesive holding it to the case.
[* blackicon_note] You may need to reheat the iOpener, or move it around on the screen as parts of itsections cool, to completely heat the screen enough to pry it off.
[* black] Leave the iOpener on the watch for at least a minute,minute to heat up the screen and soften the adhesive holding it to the case.
[* blackicon_note] You may need to reheat the iOpener, or move it around on the screen as parts of itsections cool, to completely heat the screen enough to pry it off.