Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #2

Edit by Jake Devincenzi

Edit approved by Jake Devincenzi

Before
After
Unchanged

Step Lines

[* black] Carefully insert a small flathead screwdriver in the seam between the metal casing and white plastic top. Use the screwdriver to pry up the white plastic top bezel. Be careful not to damage the soft plastic with your screwdriver. Alternately, a small dab of hot glue may be applied to the bezel and stuck to a wooden spoon or spatula.
[* black] Carefully insert a small flathead screwdriver in the seam between the metal casing and white plastic top. Use the screwdriver to pry up the white plastic top bezel. Be careful not to damage the soft plastic with your screwdriver. Alternately, a small dab of hot glue may be applied to the bezel and stuck to a wooden spoon or spatula.
[* icon_note] The top bezel is held on with an adhesive, so it may be necessary to pry up in several different locations to free the part.
[* black] To make this job easier, heat up the adhesive with a hairdryer on low heat for a few seconds.