Skip to main content

Changes to Step #2

Edit by Andrew Yoder

Edit approved by Andrew Yoder

Deleted
Added
Unchanged

Step Lines

[* black] Using a [product|IF145-035|multimeter] (set in ohms to test resistance), test each terminal on the base of the plug to see which terminal corresponds to which speaker (left or right). You'll know they correspond when a value '''other than 1''' appears on the voltmetermultimeter.
[* black] Using a [product|IF145-035|multimeter] (set in ohms to test resistance), test each terminal on the base of the plug to see which terminal corresponds to which speaker (left or right). You'll know they correspond when a value '''other than 1''' appears on the voltmetermultimeter.
[* black] Image 3 shows which part of the plug corresponds to each cable:
[* red] Right
[* green] Left
[* red] Right
[* yellow] Common (or ground)
[* icon_note] My results showed that the terminal with the larger hole corresponded to the right speaker, while the terminal with the smaller hole corresponded to the left speaker. Your results ''may'' differ.

Image 3

Old Version

New Version