Skip to main content

Changes to Step #12

Edit by Evan Noronha

Edit approved by Evan Noronha

Before
After
Unchanged

Step Lines

[* black] It's time to put the chips on the table! Let's see what this logic board has to offer:
[* red] Elpida/Micron [http://www.micron.com/parts/dram/mobile-ddr3-sdram/edfb164a1ma-gd-f?pc=|FB164A1MA-GD-F|new_window=true] 8 GB LPDDR3 Mobile RAM
- [* orange] Toshiba TH58TFT0DFKLAVF NB2953 128 GB SLC NAND Flash memory (+ 128 GB on the reverse side for a total of 256 GB)
+ [* orange] Toshiba TH58TFT0DFKLAVF NB2953 128 GB MLC NAND Flash memory (+ 128 GB on the reverse side for a total of 256 GB)
[* yellow] NXP [http://www.nxp.com/documents/data_sheet/LPC11U3X.pdf|11U37|new_window=true] microcontroller; 128 kB flash, 10kB SRAM
[* green] SMSC [http://ww1.microchip.com/downloads/en/DeviceDoc/emc1704-2refsch.pdf|1704-2|new_window=true] Temperature Sensor
[* light_blue] Texas Instrument SN6508 (probably power converter related to [http://www.ti.com/product/sn6501|SN6501|new_window=true])