Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #1

Edit by Jacob Abrego

Edit approved by Jacob Abrego

Before
After
Unchanged

Step Lines

[* black] Place the camera backward. (The LCD screen side should be facing up)
[*
red] Remove the four 3.2 mm Philip'sPhillips screws with a #00 Phillips screwdriver.
[* icon_note] Note: The screws are
located on the backside of the camera around the edges connecting the lens to the casing.
[* icon_note] Be careful when removing the screws to not strip them by applying enough pressure and rotating in the proper direction.

[* icon_cautionblue] Do not remove the top right Philip'sPhillip's screw because the lens'lens gears may fall out.
[* black] Place the camera backward. (The LCD screen side should be facing up)
[*
red] Remove the four 3.2 mm Philip'sPhillips screws with a #00 Phillips screwdriver.
[* icon_note] Note: The screws are
located on the backside of the camera around the edges connecting the lens to the casing.
[* icon_note] Be careful when removing the screws to not strip them by applying enough pressure and rotating in the proper direction.

[* icon_cautionblue] Do not remove the top right Philip'sPhillip's screw because the lens'lens gears may fall out.

Image 1

Old Version

New Version

Image 2

Old Version

New Version