Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #1

Edit by William

Pending approval

Before
After
Unchanged

Step Lines

[* red] Remove the four 3.2 mm Philip's screws located on the backside of the camera around the edges connecting the lens to the casing.
[* icon_note] Be careful when removing the screws to not strip them by applying enough pressure and rotating in the proper direction.
[* blueicon_caution] Do not remove the top right Philip's screw because the lens' gears may fall out.
[* blueicon_caution] Do not remove the top right Philip's screw because the lens' gears may fall out.

Image 1

Old Version

New Version