Skip to main content

Changes to Step #2

Edit by Silvia Sorto

Edit approved by Jeff Suovanen

Before
After
Unchanged

Step Lines

-[* black] To remove the internal plastic cover, remove the 14 screws with a Tork-5 screwdriver. (11 black 3.6mm screws, and three 4.45mm screws) (picture 3671)
+[* black] To remove the internal plastic cover, remove the 14 screws with a Tork-5 screwdriver. (11 black 3.6mm screws, and three 4.45mm screws)
+[* icon_note] Orange circles= 4.45mm screws
+[* icon_note] Red circles = 3.6mm screws
[* black] After removing the screws, gently snap the perimeter clips open, and remove the internal plastic case. (Picture 3669)

Image 1

No previous image

Added

Image 2

No previous image

Added