Skip to main content

Changes to Step #6

Edit by Eric Jesse

Edit approved by Eric Jesse

Before
After
Unchanged

Step Lines

[* black] Remove wires:
[* black] Start by removing the black wire on each side.
[* black] Next, remove the WiFi antenna wire from the motherboard.
[* black] Finally, remove the yellow, red, and black wires.
-[* black] To put the wires back in their correct locations you will need a soldering iron to solder the wire back in place. Here is a guide on how to soder [guide|750]
+[* black] To put the wires back in their correct locations you will need a soldering iron to solder the wire back in place. You will do this once the motherboard is replaced. Here is a guide on how to soder [guide|750]