Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #4

Edit by Adam O'Camb

Edit approved by Adam O'Camb

Before
After
Unchanged

Step Lines

[* redblack] Carefully lift the lower casing from its bottom edge.
[* redblack] Carefully lift the lower casing from its bottom edge.
[* icon_caution] The lower case is still attached to the motherboard by the volume and SD board cable highlighted in red. Do not try to completely remove the lower case of the DSi yet.
[* orange] Pry the volume and SD board cable up from its socket on the motherboard using a spudger.
[* orange] Once the cable is completely removed, then you may take off the entire outer casing.

Image 1

Old Version

New Version