Skip to main content

Changes to Step #4

Edit by Cri Cri

Edit approved by Cri Cri

Before
After
Unchanged

Step Lines

[title] Fixing it
-[* black] Bend just a little bit the small metal band until by pushing the trigger actually triggers the small ***blue*** switch inside the stick.
+[* black] Note the small metal plate.
+[* black] Bend it just a little from the middle so that pushing the trigger actually pushes the small ***blue*** switch inside the stick.
[* black] Test the trigger before putting back the plastic cover
-[* black] Remember when screwing the screws that 5&6 are not the same as 6&8.
+[* icon_reminder] Remember when screwing the screws that 5&6 go to the bottom sides and 7&8 go at the top.