Skip to main content

Changes to Step #2

Edit by Cri Cri

Edit approved by Cri Cri

Before
After
Unchanged

Step Lines

+[title] Open the Joystick
+[* icon_note] Please take a moment and note how your joystick is assembled and all the parts that can be dettached. I recommend to make a few photos before dismanteling it.
+[* black] With the Phillips screwdrive unscrew the #1 to #4 screws in Fig. 1.
+[* black] Using the Torx T10 head, unscrew the #5 (Fig. 1), #6, #7 and #8 screws (Fig. 2)
+[* icon_caution] Screws 5 & 6 have a larger thread pace than 7 & 8, although the heads are the same. So please take care when you screw them back on.
+[* black] Using your hand, unscrew #9 (Fig. 2). Please note that you cannot completely remove this screw, but you don't need to do this anyway.
+[* icon_caution] Carefully remove the plastic bracket and the support holding the "Pinky trigger" (Fig. 3). ***DO NOT*** force its removal, or you can break it.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added