Skip to main content

Changes to Step #1

Edit by Kristen Gismondi

Edit approved by Kristen Gismondi

Before
After
Unchanged

Step Lines

[title] Clip Side Repair
-[* red] To begin, remove both .6 cm screws from the clip* side of the camera.
-[* light_blue] After you have removed the two screws, remove both the clip and the plate behind the clip so that the inside of the camera is exposed.
-[* icon_note] *If one of more of the clips appear to be broken the back plate might need to be replaced.
+[* red] Remove both 6 mm screws from the clip side of the camera.
+[* orange] After you have removed the two screws, remove both the clip and the plate behind the clip so that the inside of the camera is exposed.
+[* icon_note] If one of more of the clips appear to be broken, the back plate might need to be replaced.

Image 2

Old Version

New Version