Skip to main content

Changes to Step #1

Edit by Joseph Shannon

Edit approved by Joseph Shannon

Deleted
Added
Unchanged

Step Lines

[* black] For both parts indicated in the photo by the bluered rectangles, lift the black flaps and gently pull the strip out. Set the strip aside. Note the shape that this wire strip is resting at and that the blue tip of the strip goes into the right connector for reassembly.
[* black] For both parts indicated in the photo by the bluered rectangles, lift the black flaps and gently pull the strip out. Set the strip aside. Note the shape that this wire strip is resting at and that the blue tip of the strip goes into the right connector for reassembly.