Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #3

Edit by Teena Carnegie

Edit approved by Teena Carnegie

Before
After
Unchanged

Step Lines

[title] Back Casing
[* red] Using a Torx, T-6 star-bit screwdriver unscrew four 7.38 mm screws from battery housing.
[* orange] Unscrew four 7.15 mm screws from back casing.
[* black] Using the blue plastic opener tooltool along the seam of the case, pry off the back casing from front casing along the seam of the casefront casing.
[* black] Using the blue plastic opener tooltool along the seam of the case, pry off the back casing from front casing along the seam of the casefront casing.
[* icon_note] Start prying from the bottom of the calculator, as the case hooks into the top.