Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #3

Edit by Jordan Dalgarn

Edit approved by Jordan Dalgarn

Before
After
Unchanged

Step Lines

[title] Back Casing
[* black] Unscrew four 7.38 mm screws from battery housing using a T-6 star-bit screwdriver from the 28-bit driver kit.
[* black] Unscrew four 7.15 mm screws from back casing using a T-6 star-bit screwdriver from the 28-bit driver kit.
[* black] Pry off back casing from front casing using the blue spudger along the seam of the case.(start on the bottom as the case hooks into the top).