Skip to main content

Changes to Step #2

Edit by Matt Wolfe

Pending approval

Deleted
Added
Unchanged

Step Lines

[title] Remove Green Circuit Board
[* blackblue] Remove the green circuit board from the top. Looking from the front of the camera, first lift the left side up above the black peg. The board should then slide out to the left.
[* blackblue] Remove the green circuit board from the top. Looking from the front of the camera, first lift the left side up above the black peg. The board should then slide out to the left.
[* icon_note] The clear flash lens may fall out. Do not worry this will not affect the camera and can easily be placed back in its spot.

Image 1

Old Version

New Version