Skip to main content

Changes to Step #1

Edit by Brian Miller

Pending approval

Deleted
Added
Unchanged

Step Lines

[* black] Remove the one (1) screw from the top of the camera, on the left side of the flash (looking from the front). The screw is shown in a red circle.
[* black] Lift the black plastic covering from atopoff the flash.
[* black] Remove the plastic flash lens from the front of the camera. This isn't necessary, but it can easily fall out and get lost
circuit board.
[* black] Remove the one (1) screw from the top of the camera, on the left side of the flash (looking from the front). The screw is shown in a red circle.
[* black] Lift the black plastic covering from atopoff the flash.
[* black] Remove the plastic flash lens from the front of the camera. This isn't necessary, but it can easily fall out and get lost
circuit board.

Image 1

Old Version

New Version