Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #3

Edit by Taylor

Edit approved by Taylor

Before
After
Unchanged

Step Lines

[* black] Place the new lens mounting ring on and reassemble.
[* icon_note] The locating pin on the right of the camera will help place the mounting ring properly.
[* icon_caution] The small metal plates marked in the image are not fastened. Tippingfastened and may displace if the camera if tipped or bumping them will cause them to fall out of placebumped. Be sure these are properly in place before reassembly.
[* icon_caution] The small metal plates marked in the image are not fastened. Tippingfastened and may displace if the camera if tipped or bumping them will cause them to fall out of placebumped. Be sure these are properly in place before reassembly.