Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #4

Edit by Miroslav Djuric

Edit approved by Miroslav Djuric

Before
After
Unchanged

Step Lines

[* black] Name printing, ports
[* black] Stylus removal before you can take
It's a bit hard to see, but there's a very subtle [http://en.wikipedia.org/wiki/Moir%C3%A9_pattern|moiré pattern] on the case offNew 3DS XL's shiny exterior.
[* black] The newest, highest tech changeback cover shows off the usual disclaimer/manufacturer imagery, telling you this is obviously the placement change on*New* version and not the old one.
[* black] You'll have to remove
the stylus (now stumpier)before disassembling your New 3DS. After pulling it out, we noticed it to be a bit different than the old one.
[* black] It's the same weight as the old one -- 1.8 grams, according to our ~~dealer~~ precision scale. Yet, it's a bit stubbier, and feels cheaper
.
[* black] Name printing, ports
[* black] Stylus removal before you can take
It's a bit hard to see, but there's a very subtle [http://en.wikipedia.org/wiki/Moir%C3%A9_pattern|moiré pattern] on the case offNew 3DS XL's shiny exterior.
[* black] The newest, highest tech changeback cover shows off the usual disclaimer/manufacturer imagery, telling you this is obviously the placement change on*New* version and not the old one.
[* black] You'll have to remove
the stylus (now stumpier)before disassembling your New 3DS. After pulling it out, we noticed it to be a bit different than the old one.
[* black] It's the same weight as the old one -- 1.8 grams, according to our ~~dealer~~ precision scale. Yet, it's a bit stubbier, and feels cheaper
.