Fix Your Stuff

Right to Repair

Store

Changes to Step #39

Edit by Evan Noronha —

Edit approved by Evan Noronha

Before
After
Unchanged

Step Lines

[* icon_note] The logic board is held in place by two strips of adhesive.
[* red] One under the upper component tab, and one under the Lightning connector ribbon cable.
[* blackicon_caution] In the following steps only pry ''only'' where directed so as to avoid damaging your logic board.
[* blackicon_caution] In the following steps only pry ''only'' where directed so as to avoid damaging your logic board.