Skip to main content

Changes to Step #2

Edit by Adam O'Camb

Edit approved by Adam O'Camb

Before
After
Unchanged

Step Lines

[* black] Disconnect the NFC antenna.
[* black] Unscrew the screws holding the black midframe in place.
-[* black] Remove back frame. Be aware that there a small taps holdingen the back into the frame of the phone. These are located at top and the sides. Wiggle af flathead screwdriver from the bottom and up the sides.
+[* black] Remove the midframe.
+ [* icon_note] Be aware that there are small tabs holding the midframe into the frame of the phone. These are located at the top and along the sides. You may need pry gently pry the midframe out with the flat end of a spudger.