Skip to main content

Changes to Step #6

Edit by Walter Galan

Pending approval

Deleted
Added
Unchanged

Step Lines

[* black] Use a heat gun to soften the adhesive under the black strip near the upper left corner of the glass display panel.
[* black] Attach a suction cup near the upper left corner of the glass display panel.
[* black] Pull up on the suction cup and use the flat end of a spudger to carefully pry the glass display panel out of the display assembly.
[* icon_note] Once the upper left corner has been separated from the display, it may be helpful to use a guitar pick or another thin plastic object to keep the glass from sticking back down to the display assembly.

Image 1

No previous image

Added

Image 2

No previous image

Added