Skip to main content

Changes to Step #4

Edit by Walter Galan

Pending approval

Deleted
Added
Unchanged

Step Lines

[* black] Use a heat gun to soften the adhesive under the black strip along the right side of the front glass panel.
[* black] Attach a suction cup along the right side of the front glass panel.
[* black] Pull up on the glass panel while you use the flat end of a spudger to separate it from the rest of the display assembly.
[* black] Continue working along the right edge of the front display glass until it is separated from the display.
[* icon_note] It may be helpful to use a guitar pick or another thin plastic object to keep the upper right corner of the front glass panel from sticking back down to the display assembly.

Image 1

No previous image

Added

Image 2

No previous image

Added