Skip to main content

Changes to Step #14

Edit by Amos Bieler

Edit declined by Sam Goldheart

Deleted
Added
Unchanged

Step Lines

[* red] TwoDespite what the photos show, '''do not''' remove the two T10 Torx screws secure thescrews! The LED unit tois held on with the two, tiny, brass-colored, Phillips-head screws. If you remove the Torx screws, you will ruin the endalignment of the display assembly.display!
[* red] TwoDespite what the photos show, '''do not''' remove the two T10 Torx screws secure thescrews! The LED unit tois held on with the two, tiny, brass-colored, Phillips-head screws. If you remove the Torx screws, you will ruin the endalignment of the display assembly.display!
[* orange] After the LED unit is removed, you can see the "periscope" style reflection and slight magnification caused by the 45^^o^^ mirror and the internal lens.