Skip to main content

Changes to Step #12

Edit by Andrew Bookholt

Pending approval

Deleted
Added
Unchanged

Step Lines

[* black] Insert wisdom hereTo oscillate the mirror, alternating electrical current at high frequency is passed through a copper coil attached to the mirror. An stationary iron core is attached to the display unit, forming a [link|http://en.wikipedia.org/wiki/Solenoid|solenoid] to produce the motive force needed for oscillation.
[* black] To tell the oscillator circuitry how fast the mirror is moving, an arm attached to the mirror passes back and forth through a hall sensor attached to the lower circuit board
.
[* black] Insert wisdom hereTo oscillate the mirror, alternating electrical current at high frequency is passed through a copper coil attached to the mirror. An stationary iron core is attached to the display unit, forming a [link|http://en.wikipedia.org/wiki/Solenoid|solenoid] to produce the motive force needed for oscillation.
[* black] To tell the oscillator circuitry how fast the mirror is moving, an arm attached to the mirror passes back and forth through a hall sensor attached to the lower circuit board
.