Skip to main content

Changes to Step #13

Edit by Andrew Bookholt

Pending approval

Deleted
Added
Unchanged

Step Lines

[* black] The board you see here is responsible for driving the oscillation of both mirrors.
[* black] The chips on this board receive display information from the main board and ensure that the mirrors are oscillating at the correct frequency by receiving feedback signals from the optical sensors shown in the previous step.
[* red] An 8 MHz crystal soldered to the board is used for timing the oscillationoscillation of the mirrors.
[* red] An 8 MHz crystal soldered to the board is used for timing the oscillationoscillation of the mirrors.

Image 1

Old Version

New Version