Skip to main content

Changes to Step #3

Edit by Andrew Bookholt

Pending approval

Before
After
Unchanged

Step Lines

[* black] Remove the heat sink from the logic board.
-[* icon_note] If the heat sink appears to be stuck to the logic board after removing all six screws, it may be helpful to use a spudger to separate the two components.
+[* icon_note] If the heat sink appears to be stuck to the logic board after removing all eight screws, it may be helpful to use a spudger to separate the two components.
[* icon_reminder] If you need to mount the heat sink back onto the logic board, we have a [guide|744|thermal paste guide] that makes replacing the thermal compound easy.