Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #1

Edit by jmueller

Edit approved by Andrew Optimus Goldheart

Before
After
Unchanged

Step Lines

[* icon_note] Before disconnecting the camera cable, a small plastic retainer stuck to the logic board must first be moved out of the way. In late-2011 models you can skip this step because there is not a plastic retainer on the camera cable connector.
[* icon_note] Before disconnecting the camera cable, a small plastic retainer stuck to the logic board must first be moved out of the way. In late-2011 models you can skip this step because there is not a plastic retainer on the camera cable connector.
[* black] Use the tip of a spudger to push the small plastic cable retainer away from the camera cable socket for enough clearance to remove the camera cable.

Image 2

No previous image

Added