Skip to main content

Fix Your Stuff

Right to Repair


Changes to Step #13

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen


Step Lines

[* black] Grab the upper case with your right hand and rotate it slightly toward the top of the display so the upper display bracket clears the edge of the upper case.
[* black] Rotate the display slightly away from the upper case.
[* black] Lift the display up and away from the upper case, minding any brackets or cables that may get caught.
[* icon_reminder] During reassembly, fit the display into place and install the display bracket Torx screws, then close the lid and lay the laptop upside-down to check the alignment of the screen to the body. If necessary, loosen the screws and realign the display before tightening.