Changes to Step #8
Edit by Walter Galan —
- Before
- After
- Unchanged
Step Lines
| [* black] Lift the black plastic flap attached to the display data cable retainer and rotate it toward the |
| [* black] Lift the black plastic flap attached to the display data cable retainer and rotate it toward the |
| [* black] Pull the display data cable out of its socket. |
| [* icon_caution] The display data cable socket is very fragile. '''Do not''' lift the connector upward as you disconnect it, as the socket may break off the logic board. Pull the cable parallel to the face of the logic board. |