Skip to main content

Changes to Step #8

Edit by Andrew Bookholt

Pending approval

Before
After
Unchanged

Step Lines

+[* black] Lift the black plastic flap attached to the display data cable retainer and rotate it toward the DC-in side of the MacBook.
+[* black] Pull the display data cable out of its socket.
+[* icon_caution] The display data cable socket is very fragile. ***Do not*** lift the connector upward as you disconnect it, as the socket may break off the logic board. Pull the cable parallel to the face of the logic board.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added