Skip to main content

Changes to Step #22

Edit by Andrew Optimus Goldheart

Edit approved by Andrew Optimus Goldheart

Deleted
Added
Unchanged

Step Lines

[* black] With the adhesive loosened, you can now insertInsert the tip of one last pick nearnext to the right-hand corner.
[*
previous step's pick, and slide it beneath the home button.
[*
icon_caution] Just like withStop about an inch from the left antenna,right-hand side to avoid cutting the digitizer cable.
[* black] Insert the pick slightly deeper and work it back toward the home button.
[* icon_caution] Again, be sure to
only slide from the outer edgepick toward the center. Reversing this directioncenter of the iPad when it is fully inserted; otherwise you may damage the antennaantenna beneath the glass.
[* black] With the adhesive loosened, you can now insertInsert the tip of one last pick nearnext to the right-hand corner.
[*
previous step's pick, and slide it beneath the home button.
[*
icon_caution] Just like withStop about an inch from the left antenna,right-hand side to avoid cutting the digitizer cable.
[* black] Insert the pick slightly deeper and work it back toward the home button.
[* icon_caution] Again, be sure to
only slide from the outer edgepick toward the center. Reversing this directioncenter of the iPad when it is fully inserted; otherwise you may damage the antennaantenna beneath the glass.