Skip to main content

Changes to Step #1

Edit by Finntastic

Pending approval

Before
After
Unchanged

Step Lines

[* black] Insert the flat end of a spudger into the small rectangular opening on the top of the cooling fan duct.
-[* black] Carefully release the fan duct retaining clip and remove the fan duct from the Xbox.
+[* black] Carefully release the fan duct retaining clip and remove the fan duct from the Xbox. (Do not press down on the black portion of the case, the clip is part of the white cooling fan duct snapped in below the black). With the spudger push down and toward the CPU/GPU to release.
[* black] The clip can alternatively be released using the metal finger of an Xbox 360 opening tool.