Skip to main content

Changes to Step #4

Edit by Andrew Bookholt

Pending approval

Before
After
Unchanged

Step Lines

[* black] To release the clips, work from the middle of the top vent.
-[* black] While slightly lifting the front edge of the top vent, use the tip of a spudger to push the clips closest to the front of the top vent toward the inside of the 360.
+[* black] While slightly lifting the front edge of the top vent, use the tip of a spudger to push the clips closest to the center of the top vent toward the inside of the 360.

Image 2

No previous image

Added