Skip to main content

Changes to Step #3

Edit by Andrew Bookholt

Pending approval

Before
After
Unchanged

Step Lines

[* black] To release the clips, work from the front edge of the bottom vent.
-[* black] While slightly lifting the front edge of the bottom vent, use the tip of a spudger to push the clip attached to the bottom vent toward the inside of the 360.
+[* black] While slightly lifting the front edge of the bottom vent, use the tip of a spudger to push the clips closest to the front of the bottom vent toward the inside of the 360.

Image 2

No previous image

Added