Skip to main content

Changes to Step #7

Edit by hawc2k

Edit approved by Jake Devincenzi

Deleted
Added
Unchanged

Step Lines

[* black] Lift the left fan and its metal bracket out of the computer.
[* blackicon_note] The tape that covers the top of the fan can be reused if the fan is removed carefully. Pivot the fan towards the screen and very slowly pull bottom of the fan away from the tape from left to right. It should peel off without stretching if done slowly. Then slide the new fan under the tape and press the tape back on the top of the fan.
[* blackicon_note] The tape that covers the top of the fan can be reused if the fan is removed carefully. Pivot the fan towards the screen and very slowly pull bottom of the fan away from the tape from left to right. It should peel off without stretching if done slowly. Then slide the new fan under the tape and press the tape back on the top of the fan.