Skip to main content

Changes to Step #3

Edit by David Hodson

Pending approval

Deleted
Added
Unchanged

Step Lines

[* redblack] Using the flat end of a spudger, flip up the retaining flap on the UNKNOWN cable ZIF connector.
[* black] With the pointed end of the spudger, pull the UNKNOWN cable from it'sits connector on the logic board.
[* redblack] Using the flat end of a spudger, flip up the retaining flap on the UNKNOWN cable ZIF connector.
[* black] With the pointed end of the spudger, pull the UNKNOWN cable from it'sits connector on the logic board.