Skip to main content

Changes to this Step

Edit by Brett Hartt

Pending approval

Before
After
Unchanged

Step Lines

-[* black] Use a fingernail to slide the locking tab on the power switch board cable connector toward the top of the console.
-[* black] Lift clear blue tab away from the connector.
+[* black] Using a spudger or fingernail, lift the clear blue tab away from the connector.
+[* black] Slide the locking tab on the power switch board cable connector toward the top of the console.
+[* icon_note] The locking tab will only move about 2mm.
[* black] Pull the power switch cable straight out of the connector.

Image 1

Deleted

Image 2

Deleted

Image 3

Deleted