Skip to main content

Changes to Step #7

Edit by Matthew Newsom

Pending approval

Before
After
Unchanged

Step Lines

-[* black] Insert a metal spudger through the left middle slit of the bottom panel, and underneath the bottom inside edge of the clip, as described previously
-[* black] Simultaneously pull up on the bottom panel and rotate the spudger away from the console to free the clip.
-[* black] In a similar fashion, free the clip at the front of the bottom panel's left edge.
-[* icon_note] The entire left side of the bottom plate should now be free.
+[* black] Insert a metal spudger through the left middle slit of the bottom bezel, and between the bottom edge of the clip and the left panel.
+[* black] Simultaneously pull the bottom bezel up and rotate the spudger away from the console to free the clip.
+[* black] In a similar fashion, free the clip at the front of the bottom bezel's left edge.
+[* icon_note] The entire left side of the bottom bezel should now be free.