Skip to main content

Changes to Step #7

Edit by Brett Hartt

Pending approval

Before
After
Unchanged

Step Lines

-[* black] In the same manner as described above, release the clips in the middle and front of the bottom panel's left edge.
-[* icon_note] The entire left side of the bottom panel should now be freel
+[* black] Insert a metal spudger through the left middle slit of the bottom panel, and underneath the bottom inside edge of the clip, as described previously
+[* black] Simultaneously pull up on the bottom panel and rotate the spudger away from the console to free the clip.
+[* black] In a similar fashion, free the clip at the front of the bottom panel's left edge.
+[* icon_note] The entire left side of the bottom plate should now be free.