Skip to main content

Changes to Step #6

Edit by Brett Hartt

Pending approval

Before
After
Unchanged

Step Lines

-[* black] Insert wisdom here.
+[* icon_note] Start in the rear left corner of the device, underneath the hard drive.
+[* black] Insert a metal spudger through the rear left slit of the top panel, underneath the bottom inside edge of the clip, as described above.
+[* black] Simultaneously pull up on the top panel and rotate the spudger away from the console to free the clip.
+[* icon_note] You may hear a "pop" signifying the clip has cleared it's catch.