Skip to main content

Changes to Step #1

Edit by Brett Hartt

Pending approval


Step Lines

-[* icon_note] Orient the Xbox 360 S so that the hard drive port is facing up and the front panel is facing to the left.
-[* black] Insert a metal spudger between the black bottom vent and the silver rim of the bottom panel, in the rear right corner of the vent.
-[* black] Rotate the spudger away from the console, prying the vent away from the bottom panel.
-[* icon_note] Be sure to rotate the spudger far enough so that the clips on the vent clear the silver rim of the bottom panel.
+[* icon_note] In the following steps, you will remove the bottom vent. It is attached to the bottom panel by the seven clips shown.

Image 1

No previous image