Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #4

Edit by Brett Hartt

Pending approval

Before
After
Unchanged

Step Lines

[* black] Using a spudger or fingernail, lift the clear blue tab away from the connector.
[* black] Slide the locking tab on the power switch board cable connector toward the top of the console.
[* icon_note] The locking tab will only move about 2mm.
[* black] Pull the power switch cable straight out of the connector.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added