Skip to main content

Changes to Step #9

Edit by Matthew Newsom

Pending approval

Before
After
Unchanged

Step Lines

-[* black] Flip the console around, so that the rear of the Xbox 360 S is facing to the right, and the right edge is facing forward.
-[* black] Insert a metal spudger through the rear right slit in the top panel, and underneath the bottom inside edge of the clip.
-[* black] While lifting up on the top panel with your fingers, rotate the spudger away from the console to free the clip.
+[* black] Rotate the console so that the rear of the Xbox 360 S is facing to the right, and the right panel is facing you.
+[* black] Insert a metal spudger through the rear-most slit on the right edge of the top bezel and between the bottom edge of the clip and the right panel.
+[* black] While lifting up on the top bezel with your fingers, rotate the spudger away from the console to free the clip.